24-port-switch
NSW242P

PoE Network Switch

    Want to buy this product?
    Find A Dealer

    Key Features

    • Easy to use, no need to configure
    • 24 x 10/100Mbps Ethernet ports
    • 2 x Gigabit combo ports (RJ45 and SFP)
    • All 100Mbps ports support PoE
    • PoE complies with IEEE802.3af/at, up to 30W for single port
    • Up to 825ft (250m) transmission distance on EXTEND mode
    • High quailty, metal housing

    SKU: NSW242P Categories: ,
    Video Test Monitor
    Ports16 or 24 × 10/100Base-TX autosensing Ethernet ports(all support PoE) 2×Gigabit combo ports (RJ45 and SFP)
    Port Attributes10/100/1000Mbit/s transfer rate; Half-duplex, full-duplex and auto-negotiation Auto MDI/MDIX
    StandardsIEEE 802.3u 100BASE-TX; IEEE 802.3ab 1000BASE-T; IEEE 802.3z 1000BASE-X ANSI/IEEE 802.3 NWay; IEEE 802.3x flow control; IEEE 802.3af and IEEE 802.3at
    MAC4K
    Packet Forwarding Rate6.55Mbps
    Switching Capacity8.8Gbps
    EXTEND ModeDisabled: all ports can communicate with each other, and monitoring optimization is disabled.
    Disabled: all ports can communicate with each other, and monitoring optimization is disabled. Enabled: Downlink ports can only communicate with uplink ports, monitoring optimization is enabled, and transmission distance can be extended to up to 250 meters
    Status LED’sLink/Act (steady green): link is normal; Link/Act (flashing green): data is being forwarded;Link/Act (off): no link PoE (steady orange): the port is powering a powered device properly PoE (off): the port is not connected to any powered device or is not supplying power Power (steady green): AC input is normal; Power (off): AC input is abnormal
    PoE802.3at/af; 16-port Max PoE capacity: 250 W; 24-port Max PoE capacity: 400W
    Consumption~ 300W (16-port); ~450W (24-port)
    AC Voltage100-240V
    Operating Temperature0°C-40°C (32°F-104°F)
    Operating Humidity10% ~ 85% RH
    Dimensions440 × 280 × 44mm (17.3 × 11 × 1.7")